2.4G RF RGBW 4 Zone Touch Remote Control For RGBW/RGBWW LED light Bulb
2.4G RF RGBW Remote Control
Remote powered by: 2 * AAA batteries(not included)
Remote working voltage: 3V
Radio frequency: 2.4-2.485GHz
Modulation mode: GFSK
Control distance: 20-30meters
Products size: 120×56×26mm
RGBW Remote Controller User Instruction
This manual describes the RGB white and RGB Warm White Remote Controller used for RGBW and RGBWW light bulb.
It can control the led lights up to four different zones, change the color, dim/brighten the lights, warm/cool white, different programs.
Basic control functions:
Long press “master ON” / “Zone ON” button, you can get the white or warm white mode.
Touch the color ring, you can get any color.
And you can change the brightness by the brightness ring + –
Program 1 (RGBW Fade In Fade Out)
This program fades in and fades out the color red, green, blue and white one after another.
Program 2 (color Flash)
In this program, red, green, blue, white, yellow, purple flashes to change.
Program 3 (Disco)
Different colors strobe and flash to change.
Program 4 (Red Color Ramp Up and Flash)
In this program, red color brightens from 0%-100% and shuts down, then flashes three times.
Program 5 (Green Color Ramp Up and Flash)
In this program, Green color brightens from 0%-100% and shuts down, then flashes three times.
Program 6 (Blue Color Ramp Up and Flash)
In this program, Blue color brightens from 0%-100% and shuts down, then flashes three times.
Program 7 (Color Change + Flash)
Here several colors fade into each other and then flash randomly.
Program 8 (Fade in and Fade out)
Here different colors fade into each other.
Program 9 (Strobe White)
Just white or warm white color flashes up.
To dim all RGBW lights at once or change the color, first press “Master ON”. TO do this with individual lights, first press “ Zone ON”. Secondly, choose the color or brightness according to the color ring or brightness ring.
>Linking & unlink the light
Linking new lights to the remote control
1.Choose which zone you want to assign the light (1 to 4)
2.Switch off the main power supply of the light in the selected zone with the main switch or pull the plug from the socket.
3.Now switch on the light again and within 3 seconds shortly press one of the Zone ON buttons one time on the remote control.
4.When this link operation is successful, the light slowly blinks 3 times on and off.
Unlinking the lights:
1.Check via the remote the control to see which zone (1 to 4) is already linked to a light.
2. Switch off the main power supply of the light with the main switch or pull the plug from the socket.
3.Now switch on the light again within 3 seconds press 5 times quickly and shortly on one of the Zone ON buttons which you want to link.
4.When this unlink operation is successful, the light quickly blinks 6 times on and off.
Grouping of several lights
You can add an endless numbers of lights to a zone on the 4 channel remote by linking the lights to different zones. This way you are completely flexible in creating different group combinations. But one light can only programmed to 4 remotes (Max) .
we recommend using rechargeable batteries for the remote controls. For that reason,we don't include ordinary batteries.We hope you appreciate our environmental friendly choices and they do not cause you any inconvenience. More detail please see the user instrction.
Safety Guide:To reduce the risk of electric shock, please ensure the light socket if turned off at the wall light switch before replacing light bulbs.
Battery Installation: Please take the remote control and carefully press the battery cover and push it away in a downward motion.
1 x RGBW remote control
1 x User Instruction